Translate
Violation Detail
Standard Cited: 19100305 G01 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1681538.015
Citation: 01004B
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 11/28/2023
Nr Instances: 1
Nr Exposed: 4
Abatement Date: 09/19/2024
Gravity: 1
Report ID: 0112000
Contest Date: 12/26/2023
Final Order: 08/19/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 08/19/2024 | $0.00 | 09/19/2024 | Other | |
| Penalty | C: Contested | 01/08/2024 | $0.00 | 01/17/2024 | Serious | |
| Penalty | Z: Issued | 11/28/2023 | $0.00 | 01/17/2024 | Serious |
Text For Citation: 01 Item/Group: 004B Hazard:
29 CFR 1910.305(g)(1)(i): Flexible cords and cables were not approved for conditions of use and location: Location: Storage/ break area - Southeast side of building. On or about June 15, 2023 the following instances of flexible cords in use where not approved were observed: a) An energized flexible cord was repaired with adhesive tape. Approval of flexible cord is based on the original condition of the cord; the adhesive tape precluded further examination of the cord's condition. b) A flexible cord without plugs on either end originated from a Cutler-Hammer 30 amp/ 240 volt disconnect switch and terminated in a Worldwide Electric 5 HP motor starter enclosure.