Translate
Violation Detail
Standard Cited: 19100213 G03 Woodworking machinery requirements.
Inspection Nr: 1218853.015
Citation: 01004B
Citation Type: Serious
Abatement Date: 07/07/2017 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/19/2017
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC):
Gravity: 5
Report ID: 0524200
Contest Date:
Final Order: 06/13/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/13/2017 | $0.00 | 07/07/2017 | Serious | |
| Penalty | Z: Issued | 05/19/2017 | $0.00 | 07/07/2017 | Serious |
Text For Citation: 01 Item/Group: 004B Hazard:
29 CFR 1910.213(g)(3): Swing cutoff saw(s) were not provided with limit chains or other equally effective devices to prevent the saw from swinging beyond the front or back edges of the table, or beyond a forward position where the gullets of the lowest saw teeth would rise above the table top: (a) In the wood shop - On or about April 3, 2017, the Duncap & Shaffer swing cutoff saw was mounted over the top of the cutting table so the entire blade would swing completely above of the table top. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).