Translate
Violation Detail
Standard Cited: 19100305 G02 III Wiring methods, components, and equipment for general use.
Inspection Nr: 1132992.015
Citation: 01004B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/02/2016
Nr Instances: 3
Nr Exposed: 5
Abatement Date: 05/16/2016
Gravity: 5
Report ID: 0830600
Contest Date:
Final Order: 05/17/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/17/2016 | $0.00 | 05/16/2016 | Serious | |
| Penalty | Z: Issued | 05/02/2016 | $0.00 | 05/16/2016 | Serious |
Text For Citation: 01 Item/Group: 004B Hazard:
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) On or about March 29, 2016, and at times prior, the following flexible wiring was deficient due to inadequate strain relief at the terminal end. (1) In the Welding Area, two 220V flexible cords where they entered the wall mounted outlet. (2) In the Welding Area, one 220V flexible cord where it entered the 4x4 box used as an extension cord end. (3) In the Machining Room, near the garage door, the terminal end of the 110V yellow cord reel. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").