Translate
Violation Detail
Standard Cited: 19100216 C02 Mills and calenders in the rubber and plastics industries.
Inspection Nr: 1596019.015
Citation: 01004A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $13,052.00
Current Penalty: $9,789.00
Issuance Date: 09/30/2022
Nr Instances: 1
Nr Exposed: 9
Abatement Date: 07/15/2024
Gravity: 10
Report ID: 0524700
Contest Date: 10/13/2022
Final Order: 03/13/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/13/2024 | $9,789.00 | 07/15/2024 | Serious | |
| Penalty | C: Contested | 10/14/2022 | $13,052.00 | 10/07/2022 | Serious | |
| Penalty | Z: Issued | 09/30/2022 | $13,052.00 | 10/07/2022 | Serious |
Text For Citation: 01 Item/Group: 004A Hazard:
29 CFR 1910.216(c)(2): On both sides of the calender and near each end of the face of the roll, there was not a cable or wire center cord connected to the safety trip: a. The D.S. Brown Company - North Baltimore, Ohio: On or about May 11, 2022, the employer did not ensure that the safety trip wire adequately protected employees from ingoing nip points of the Bolling calender (s/n C-3896-1) in that the trip wire was not present on both sides of the calender, at each end, and deflection hindered an employee's ability to readily operate the trip wire. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.