Translate
Violation Detail
Standard Cited: 19100147 C01 The control of hazardous energy (lockout/tagout).
Inspection Nr: 1401658.015
Citation: 01004A
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $3,789.00
Current Penalty: $0.00
Issuance Date: 11/01/2019
Nr Instances: 1
Nr Exposed: 1
Abatement Date:
Gravity: 5
Report ID: 0523400
Contest Date:
Final Order: 11/21/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/21/2019 | $0.00 | Serious | ||
| Penalty | Z: Issued | 11/01/2019 | $3,789.00 | Serious |
Text For Citation: 01 Item/Group: 004A Hazard:
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) On or about May 16, 2019, the employer did not establish and implement a written energy control program consisting of energy control procedures, employee training and/or periodic inspections for equipment such as but not limited to the Haas SL-40 CNC Lathe (model no. SL-40, serial no. 3089788, company no. L13), Haas SL-30 CNC Lathe (model no. SL-30T, serial no. 72951, company no. L12), Haas VF-7 Vertical Machining Center (model no. VF-7/50, serial no. 1098819, company no. L4).