Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1328995.015
Citation: 01004A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,959.00
Current Penalty: $4,525.92
Issuance Date: 08/20/2018
Nr Instances: 2
Nr Exposed: 4
Abatement Date: 10/05/2018
Gravity: 10
Report ID: 0112000
Contest Date: 09/14/2018
Final Order: 06/10/2019
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 06/10/2019 | $4,525.92 | 10/05/2018 | Serious | |
| Penalty | C: Contested | 09/18/2018 | $9,959.00 | 10/05/2018 | Serious | |
| Penalty | Z: Issued | 08/20/2018 | $9,959.00 | 10/05/2018 | Serious |
Text For Citation: 01 Item/Group: 004A Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: A. Fiber Baler: On, or about, July 9, 2018, an employee suffered serious hand injuries while assisting with a manual baler wire insertion. The Harris HLO baler had not been turned off and locked out and the task required the employee to reach into a hazardous area of the machine. B. Conveyor 81A: On, or about, July 10, 2018, an employee entered the screener section of the machine for daily cleaning. The machine was not locked out at the main disconnect in accordance with the established procedure, instead one of the three shaft motors was used. Also, the machine controls were not operated to ensure that the conveyor shafts were properly locked out.