Translate
Violation Detail
Standard Cited: 19100213 M01 Woodworking machinery requirements.
Inspection Nr: 1196795.015
Citation: 01004A
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $8,873.00
Current Penalty: $0.00
Issuance Date: 04/24/2017
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 10
Report ID: 0214500
Contest Date: 05/16/2017
Final Order: 10/23/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 10/23/2017 | $0.00 | Serious | ||
| Penalty | F: Formal Settlement | 10/23/2017 | $0.00 | Serious | ||
| Penalty | F: Formal Settlement | 10/23/2017 | $8,873.00 | Serious | ||
| Penalty | C: Contested | 06/02/2017 | $8,873.00 | Serious | ||
| Penalty | C: Contested | 06/02/2017 | $8,873.00 | Serious | ||
| Penalty | C: Contested | 06/02/2017 | $8,873.00 | Serious | ||
| Penalty | Z: Issued | 04/24/2017 | $8,873.00 | Serious | ||
| Penalty | Z: Issued | 04/24/2017 | $8,873.00 | Serious | ||
| Penalty | Z: Issued | 04/24/2017 | $8,873.00 | Serious |
Text For Citation: 01 Item/Group: 004A Hazard:
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Basement- Cutting area: Employee was exposed to amputation hazards while engaged in wood cutting operations utilizing a table saw that was notguarded, on or about 12/7/16. 29 CFR 1910.213(m)(1): Cutting heads of wood shaper(s) were not enclosed with a cage or adjustable guard so designed so as to keep the operator's hand away from the cutting edge: a) Basement- Cutting area: Employee was exposed to amputation hazards while engaged in wood cutting operations utilizing a fixed router that was not guarded, on or about 12/7/16. 29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefore, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his/her body in the danger zone during the operating cycle. a) 1st Floor - Cutting area: Employee was exposed to amputation hazards while engaged in acrylic cutting operations utilizing a table saw that was not provided with any guard, on or about 12/7/16. b) 2nd Floor - Cutting area: Employee was exposed to amputation hazards while engaged in acrylic cutting operations utilizing a router that was not provided with any guard, on or about 12/7/16 c) 3rd Floor - Cutting area: Employee was exposed to amputation hazards while engaged in acrylic cutting operations utilizing a press drill that was not provided with any guard, on or about 12/7/16. d) 3rd Floor - Cutting area: Employee was exposed to amputation hazards while engaged in acrylic cutting operations utilizing a chop saw that was not provided with any guard, on or about 12/7/16. e) 2nd Floor - Cutting area: Employee was exposed to amputation hazards while engaged in acrylic cutting operations utilizing a Wood Shaper that was not provided with any guard, on or about 12/9/16.