Translate
Violation Detail
Standard Cited: 19100219 C04 I Mechanical power-transmission apparatus.
Inspection Nr: 945407.015
Citation: 01004
Citation Type: Serious
Abatement Date: 02/28/2014 2
Initial Penalty: $4,675.00
Current Penalty: $2,800.00
Issuance Date: 01/10/2014
Nr Instances: 32
Nr Exposed: 5
Related Event Code (REC):
Gravity: 5
Report ID: 0418100
Contest Date:
Final Order: 01/31/2014
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/31/2014 | $2,800.00 | 02/28/2014 | Serious | |
| Penalty | Z: Issued | 01/10/2014 | $4,675.00 | 02/28/2014 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: On or about 10/30/13 at Augusta, GA: Employees were exposed to caught between hazards while performing work in the Printer/Former Area. The employer failed to ensure that projected shaft ends were at a length less that one half the diameter of the shaft in the following instances: a. Printer #1: The Lof & Sons Printer had 4 shafts that were 5 inches in length and 1 1/4 inches in diameter. b. Printer #2: The Lof & Sons Printer had 4 shafts that were 5.5 inches in length and 1 1/4 inches in diameter. c. Printer #9: The Lof & Sons Printer had 8 shafts that were 7 inches in length and 1 1/4 inches in diameter. d. Printer #10: The Lof & Sons Printer had 4 shafts that were 4.5 inches in length and 1 1/4 inches in diameter. e. Printer #11: The Lof & Sons Printer had 4 shafts that were 4.5 inches in length and 1 1/4 inches in diameter. f. Printer #14: The Lof & Sons Printer had 8 shafts that were 4.5 inches in length and 1 1/4 inches in diameter.