Translate
Violation Detail
Standard Cited: 19100219 C02 I Mechanical power-transmission apparatus.
This violation item has been deleted.
Inspection Nr: 921917.015
Citation: 01004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,000.00
Current Penalty: $0.00
Issuance Date: 10/21/2013
Nr Instances: 7
Nr Exposed: 2
Abatement Date: 10/31/2013
Gravity: 10
Report ID: 0626600
Contest Date: 11/13/2013
Final Order: 05/26/2014
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | R: Review Commission | 05/26/2014 | $0.00 | 10/31/2013 | Serious | |
| Penalty | C: Contested | 11/15/2013 | $7,000.00 | 10/31/2013 | Serious | |
| Penalty | Z: Issued | 10/21/2013 | $7,000.00 | 10/31/2013 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: The employer does not guard all exposed parts of horizontal shafting seven feet or less from the floor or working platform with stationary casings or troughs. This violation was observed on or about July 19, 2013, in the heat treat area where employees were exposed to caught-by hazards when walking and working near the heat treat machine without guards protecting all exposed parts of horizontal shafting that were seven feet or less from the working floor or platform with a stationary casing or by troughs. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that employees are protected from all parts of horizontal shafting seven feet or less from the floor or working platform.