Text For Citation: 01 Item/Group: 004 Hazard:

29 CFR 1910.119(f)(4): The employer did not develop and implement safe work practices to provide for the control of hazards during operations such as lockout/tagout; confined space entry; opening process equipment or piping; and control over entrance into a facility by maintenance, contractor, laboratory, or other support personnel: a) On or about May 15, 2012 and times prior, effective safe work practices had not been developed and implemented for maintenance operations to address the re-installation of plugs into drain valve lines after the equipment was placed back into service. A plug was missing on a 1 inch valve on the waste gas stream line shown on FS-105A. b) On or about May 25, 2012 and times prior, effective safe work practices had not been developed and implemented for maintenance operations to address the re-installation of plugs into drain valve lines after the equipment was placed back into service. A plug was missing on a drain valve on piping coming out of the amine flash tank (PV-111). Abatement Note: Abatement certification and documentation is required for this item (see enclosed "Certification of Corrective Action Worksheet").