Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
This violation item has been deleted.
Inspection Nr: 309222412
Citation: 01004
Citation Type: Serious
Abatement Status:
Initial Penalty: $2,500.00
Current Penalty: $2,500.00
Issuance Date: 01/17/2006
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 01/23/2006
Gravity: 10
Report ID: 0627100
Contest Date:
Final Order:
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/10/2006 | $2,500.00 | 01/23/2006 | Serious | |
| Penalty | Z: Issued | 01/17/2006 | $2,500.00 | 01/23/2006 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard: UNAPEQUIP
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Construction Site: The Terex Aerial Scissor Lift, serial number 99360123, areas where the scissor lift was used were not inspected for drop-offs or holes, bumps, and floor obstruction before being used in such areas, exposing employees to overturning of the lift. Among other methods, one feasible and acceptable abatement method to correct the hazard is: To comply with ANSI/SIA 92.6, paragraph 7.8(1) through 7.8(9). Before the aerial platform is used and during use, the user shall check the area in which the aerial platform is to be used for possible hazards such as, but not limited to: drop-offs, holes, bumps, floor obstruction, debris, and other possible unsafe conditions.