Translate
Violation Detail
Standard Cited: 19100305 G02 III Wiring methods, components, and equipment for general use.
Inspection Nr: 1447397.015
Citation: 01004
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $5,205.00
Current Penalty: $3,470.00
Issuance Date: 03/09/2020
Nr Instances: 1
Nr Exposed: 1
Abatement Date:
Gravity: 1
Report ID: 0522300
Contest Date:
Final Order: 04/06/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/06/2020 | $3,470.00 | Serious | ||
| Penalty | Z: Issued | 03/09/2020 | $5,205.00 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: On or about November 14, 2019, adequate strain relief was not provided for the rigid conduit that fed into the 110/220/480 volts, 3 phase electrical panel, located on the southwest wall of the production area; adjacent to the updraft spray booth. The conduit fitting and/or connector used for routing the electrical wires into the panel box was not attached thus potentially exposing workers who frequent the area to electrical hazards should the wiring be damaged and/or ripped out.