Translate
Violation Detail
Standard Cited: 19100266 F03 VII Logging operations.
Inspection Nr: 1385213.015
Citation: 01004
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $2,842.00
Current Penalty: $2,560.00
Issuance Date: 04/04/2019
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0213100
Contest Date:
Final Order: 04/17/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/17/2019 | $2,560.00 | Serious | ||
| Penalty | Z: Issued | 04/04/2019 | $2,842.00 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.266(f)(3)(vii): Each machine manufactured after August 1, 1996, shall have a cab that is fully enclosed with mesh material with openings no greater than 2 inches (5.08 cm) at its least dimension. The cab may be enclosed with other material(s) where the employer demonstrates such material(s) provides equivalent protection and visibility. Exception: Equivalent visibility is not required for the lower portion of the cab where there are control panels or similar obstructions in the cab, or where visibility is not necessary for safe operation of the machine: a) Logging site at 1729 NYS Route 9N, Ticonderoga, NY - On or about October 6, 2018, an employee was operating a Timberjack, Model 240-A logging skidder with the driver's side door removed from the vehicle exposing the employee to a crushing hazard.