Text For Citation: 01 Item/Group: 004 Hazard:

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Machine Shop, Cutting and Grinding Area, Wilton vertical belt sander, where employees were exposed to amputation and flying metal chip and spark hazards from the belt sander. (b) Machine Shop, Metal Fabrication Area, Wilton vertical belt sander, where employees were exposed to amputation and flying metal chip and spark hazards from the belt sander. (c) Machine Shop, Metal Fabrication Area, Jet Drill Press, where employees were exposed to amputation and flying metal chip hazards from the rotating drill. (d) Machine Shop, Metal Fabrication Area, Acura 12 inch drill press, where employees were exposed to amputation and flying metal chip hazards from the rotating drill. (e) Machine Shop, Metal Fabrication Area, Leland Gifford Drill Press, where employees were exposed to amputation and flying metal chip hazards from the rotating drill. (h) Machine Shop, Metal Fabrication Area, Jet Drill Press, where employees were exposed to amputation and flying metal chip hazards from the rotating drill. (i) Machine Shop, Metal Fabrication Area, Jet Drill Press, where employees were exposed to amputation and flying metal chip hazards from the rotating drill. (j) Machine Shop, Metal Fabrication Area, Hysan 97 horizontal lathe, where employees were exposed to amputation and flying metal chip hazards from the rotating chuck of the lathe. (k) Machine Shop, Metal Fabrication Area, Monarch Sidney horizontal lathe, where employees were exposed to amputation and flying metal chip hazards from the rotating chuck of the lathe.