Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1371338.015
Citation: 01004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $8,051.00
Current Penalty: $4,830.60
Issuance Date: 04/11/2019
Nr Instances: 4
Nr Exposed: 4
Abatement Date: 05/09/2019
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 05/06/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/06/2019 | $4,830.60 | 05/09/2019 | Serious | |
| Penalty | Z: Issued | 04/11/2019 | $8,051.00 | 05/09/2019 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle. (a) On or about February 5, 2019, in the Die Shop North, the Blanchard Grinder, BLA 1, did not have adequate guarding which prevented contact to the point of operation. (b) On or about February 5, 2019, in the Die Shop North, the Makino GF-6 #1 (S/N: 531, CNC ML 7) had the door interlock release "ON" exposing employees to struck by hazards. (c) On or about February 5, 2019, in the Die Shop North, the Makino GF #2 (S/N: 650, CNC ML 8) had the door interlock release "ON" exposing employees to struck by hazards. (d) On or about February 5, 2019, in the Die Shop North, the Makino (Type: F5, S/N: V150206, MILL11) had the safety interlock bypassed when the actuator key had been removed from the door of the CNC and inserted into the solenoid locking tongue switch which exposed employees to struck by hazards. (e) (f)