Translate
Violation Detail
Standard Cited: 19100147 C06 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1365456.015
Citation: 01004
Citation Type: Serious
Abatement Status: Not Completed - Employer Out of Business
Initial Penalty: $9,282.00
Current Penalty: $9,000.00
Issuance Date: 05/03/2019
Nr Instances: 3
Nr Exposed: 7
Abatement Date: 05/30/2019
Gravity: 10
Report ID: 0524200
Contest Date: 05/08/2019
Final Order: 08/28/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 08/28/2020 | $9,000.00 | 05/30/2019 | Serious | |
| Penalty | C: Contested | 08/13/2019 | $9,282.00 | 05/30/2019 | Serious | |
| Penalty | Z: Issued | 05/03/2019 | $9,282.00 | 05/30/2019 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
1910.147(c)(6)(i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. a) Stamping Department- On or about March 14, 2019, employees were exposed to machine hazards associated with the unexpected energization of Press #13, Press #14, Press #24 and Press #3673, and the Minster Press, at the facility. The employer did not conduct periodic inspection at least annually to ensure that the procedure and requirements of this standard were being followed for this equipment. b) Bending Department- On or about April 23, 2019, employees were exposed to machine hazards associated with the unexpected energization of Press Brake #17 at the facility. The employer did not conduct periodic inspection at least annually to ensure that the procedure and requirements of this standard were being followed for this equipment. c) Shear Department- On or about April 16, 2019, an employee was exposed to machine hazards associated with the unexpected energization of Shear #1. The employer did not conduct periodic inspection at least annually to ensure that the procedure and requirements of this standard were being followed for this equipment. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.