Violation Detail
Standard Cited: 19100180 B02 Crawler locomotive and truck cranes.
Inspection Nr: 1356841.015
Citation: 01004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $13,127.00
Current Penalty: $8,584.76
Issuance Date: 02/22/2019
Nr Instances: 1
Nr Exposed: 4
Abatement Date: 03/20/2019
Gravity: 10
Report ID: 0418100
Contest Date:
Final Order: 03/18/2019
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 03/18/2019 | $8,584.76 | 03/20/2019 | Serious | |
Penalty | Z: Issued | 02/22/2019 | $13,127.00 | 03/20/2019 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.180(b)(2): Crawler, locomotive, and truck cranes constructed and utilized on or after August 31, 1971, did not meet the design specifications of the American National Standard Safety Code for Crawler, Locomotive, and Truck Cranes, ANSI B30.5-1968, which was incorporated by reference as specified in Sec. 1910.6. Crawler, locomotive, and truck cranes constructed prior to August 31, 1971, should be modified to conform to those design specifications by February 15, 1972, unless it can be shown that the crane cannot feasibly or economically be altered and that the crane substantially complies with the requirements of this section. On or about 10/29/2018, in the site work area of the Traffic Barricade Type H (TBH) form equipment located outside of the facility at 220 Cargill Road Connector, Macon, GA: The employer failed to ensure the swing brake and locking device had adequate holding power in both directions and did not prevent movement of the rotating superstructure under normal operation. The swing brake and locking device did not meet the requirement in ANSI B30.5-1968, section 5.1.4.2.