Translate
Violation Detail
Standard Cited: 19260305 D01 IV Jacks-lever and ratchet, screw, and hydraulic.
Inspection Nr: 1341392.015
Citation: 01004
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $3,880.00
Current Penalty: $0.00
Issuance Date: 10/16/2018
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 11/30/2018
Gravity:
Report ID: 0522300
Contest Date:
Final Order: 11/01/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/01/2018 | $0.00 | 11/30/2018 | Other | |
| Penalty | Z: Issued | 10/16/2018 | $3,880.00 | 11/09/2018 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1926.305(d)(1)(iv): Each jack shall be thoroughly inspected at times which depend upon the service conditions: On or about August 17, 2018, employees working at the Shaft #3 H-08 regulator shaft were using a portable electrical Enerpac hydraulic pump unit (model PUJ1200B) and cylinder ram (Model RC104) that was not thoroughly inspected upon use. The electrical start switch was broken, the cylinder ram was leaking hydraulic fluid and the manufacturers identification and capacity label was missing. The employer failed to inspect the unit [per the 1926.305(d)(1)(iv)(b) requirement] for jacks sent out of shop for special work, when sent out and when returned: