Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1340849.015
Citation: 01004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,054.00
Current Penalty: $0.00
Issuance Date: 10/19/2018
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 12/07/2018
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 11/08/2018
Related Event Code (REC): C
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 11/08/2018 | $0.00 | 12/07/2018 | Serious | |
Penalty | Z: Issued | 10/19/2018 | $9,054.00 | 12/07/2018 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: a) On or about 8/22/2018 employees who performed maintenance on belt sanders, band saws, table saws, routers, etc in the facility were not required to: (1) Turn off and shut down the belt sanders, band saws, table saws, routers etc. (2) Physically locate and operate energy isolating devices in such a manner as to isolate machine or equipment from the energy source. (3) Affix lockout or tagout devices to energy isolating electrical device(s); and (4) verify that isolation and de-energization of the machine or equipment have been accomplished.