Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1186613.015
Citation: 01004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $8,730.00
Current Penalty: $4,365.00
Issuance Date: 11/17/2016
Nr Instances: 13
Nr Exposed: 9
Abatement Date: 12/28/2016
Gravity: 10
Report ID: 0626600
Contest Date:
Final Order: 12/13/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/13/2016 | $4,365.00 | 12/28/2016 | Serious | |
| Penalty | Z: Issued | 11/17/2016 | $8,730.00 | 12/07/2016 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks, On or about October 25, 2016: a. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC PUMA 480 without a functioning door interlock. b. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC PUMA 400L without a functioning door interlock. c. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC PUMA 300 without a functioning door interlock. d. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC PUMA 240L without a functioning door interlock. e. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC FORTUNE VTURN 26 without a functioning door interlock. f. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC FORTUNE VTURN 15 without a functioning door interlock. g. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC QUANTUM 40 without a functioning door interlock. h. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC QUANTUM 50 without a functioning door interlock. i. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC DOOSAN 5400 without a functioning door interlock. j. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC DOOSAN 6500 without a functioning door interlock. k. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a CNC GALAXY without a functioning door interlock. l. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a KINGSTON HS 1700 without a chuck guard. m. In the machine shop where employees were exposed to struck-by and caught-by hazards when operating a DOALL 25H without a chuck guard.