Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1149838.015
Citation: 01004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,799.00
Current Penalty: $6,500.00
Issuance Date: 08/18/2016
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 08/30/2016
Gravity: 5
Report ID: 0418300
Contest Date:
Final Order: 09/19/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/19/2016 | $6,500.00 | 08/30/2016 | Serious | |
| Penalty | Z: Issued | 08/18/2016 | $9,799.00 | 08/30/2016 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 05/20/2016 - Mill Room; Stihl Holtec Cross Cut Saw; Serial #93160; Guard on the end of the gliding guide of the cutting bar facing the east side of the mill room was damaged. The barrier guard on the left side was broken and there was a gap in the guard enclosure that was 8" wide by 36" long exposing employees to the point of operation of the chain drive and flying chips when the saw was cutting packs of wood. b) On or about 05/20/2016 - Behind Mill Room; West Salem Machinery Company Horizontal Hog; Serial #2838RH; Sides of the shaker screen for the hog had in-running pinch points that were not guarded.