Translate
Violation Detail
Standard Cited: 19100305 G01 IV A Wiring methods, components, and equipment for general use.
Inspection Nr: 1110257.015
Citation: 01004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $2,800.00
Current Penalty: $1,680.00
Issuance Date: 01/29/2016
Nr Instances: 6
Nr Exposed: 6
Abatement Date: 03/17/2016
Gravity: 5
Report ID: 0112000
Contest Date:
Final Order: 02/22/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/22/2016 | $1,680.00 | 03/17/2016 | Serious | |
| Penalty | Z: Issued | 01/29/2016 | $2,800.00 | 03/17/2016 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: A. Compressor Room: On, or about, December 2, 2015, an extension cord was used on a regular basis to charge the battery provided on the Factory CAT floor sweeper. B. Aisle near Compressor Room: On, or about, December 2, 2015, an extension cord was used to energize the EMC water evaporator unit. C. Tool Room: On, or about, December 2, 2015: 1. An extension cord was used to energize a counter unit and light fixture provided at Bridgeport milling machine, serial number J212593. 2. An extension cord was used to energize a light fixture provided at Bridgeport milling machine, serial number J226094 and a feed motor provided at Bridgeport milling machine, serial number J117652. 3. An orange extension cord was run from a receptacle in the Tool Room to the work area of the OKK horizontal milling machine in order to energize auxiliary equipment such as a light fixture or fan, as needed. D. Shop Floor: On, or about, December 2, 2015, a computer work station that fed programs to the DeVleig jig mill, #63, was energized through an extension cord.