Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1018284.015
Citation: 01004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,000.00
Current Penalty: $5,250.00
Issuance Date: 07/01/2015
Nr Instances: 3
Nr Exposed: 4
Abatement Date: 10/01/2015
Gravity: 10
Report ID: 0521400
Contest Date:
Final Order: 07/22/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/22/2015 | $5,250.00 | 10/01/2015 | Serious | |
| Penalty | Z: Issued | 07/01/2015 | $7,000.00 | 08/18/2015 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Carol Stream: (a) Stamping- Employees working at the SMG Feintool 630 #1 were exposed to injury from being struck by rotating equipment components during regular coil loading operations. (b) Stamping- Employees working at the SMG Feintool 630 #1 were exposed to injury while clearing scrap from the cutoff shear. A movable guard on the scrap chute was provided a sensor that had been bypassed. (c) Welding- Operators and other employees were exposed to being struck by flying sparks and chips from welding operations on the G-03 welder. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).