Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1003527.015
Citation: 01004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,600.00
Current Penalty: $4,350.00
Issuance Date: 04/16/2015
Nr Instances: 2
Nr Exposed: 5
Abatement Date: 09/30/2015
Gravity: 5
Report ID: 0524200
Contest Date:
Final Order: 05/07/2015
Related Event Code (REC):
Emphasis:
| Failure to Abate | |||||||
|---|---|---|---|---|---|---|---|
| Activity Nr | Issuance | Penalty | Contest | Final Order | |||
| 1127396 | 08/01/2016 | $6,300.00 | 08/24/2016 | ||||
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $4,350.00 | 09/30/2015 | Serious | ||
| FTA | I: Informal Settlement | 08/24/2016 | $6,300.00 | 08/05/2016 | 1127396.015 | |
| FTA | Z: Issued | 08/01/2016 | $12,600.00 | 08/05/2016 | 1127396.015 | |
| Penalty | I: Informal Settlement | 05/07/2015 | $4,350.00 | 05/15/2015 | Serious | |
| Penalty | Z: Issued | 04/16/2015 | $6,600.00 | 05/05/2015 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) SL-6 Fascia Line - The guarding on the shear was inadequate exposing employees to pinch-point, caught-in and struck-by hazards from the shear as it moves back and forth during cutting operation. The feed end of the shear was completely unguarded, while the discharge side guard opening was too large (approximately 11.5 X 9.5 inches) and was missing fasteners to hold the guard in place. (b) SD-1 Double 5 Siding Line - On or about October 29, 2014, the shear was not guarded exposing employees to pinch-point, caught-in and struck-by hazards.