Violation Detail
Standard Cited: 19100217 C05 Mechanical power presses.
Inspection Nr: 1029772.015
Citation: 01003D
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 04/23/2015
Nr Instances: 1
Nr Exposed: 20
Abatement Date: 05/18/2015
Gravity: 10
Report ID: 0524700
Contest Date:
Final Order: 06/02/2015
Related Event Code (REC): A
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/02/2015 | $0.00 | 05/18/2015 | Serious | |
Penalty | Z: Issued | 04/23/2015 | $0.00 | 05/18/2015 | Serious |
Text For Citation: 01 Item/Group: 003D Hazard:
29 CFR 1910.217(c)(5): Additional requirements for safe-guarding. Where the operator feeds or removes parts by placing one or both hands in the point of operation, and a two hand control, presence sensing device, Type B gate or movable barrier (on a part revolution clutch) was not used for safeguarding: a.) Shiloh Industries, Inc. dba Wellington Stamping located at 350 Maple St. Wellington, OH 44090; On or about February 5, 2015, the employer did not assure the 01C and O1D OBI Danly mechanical power presses was equipped with appropriate safeguards. Employees are required to perform hand in die operations while the 01C press was in INCH mode, bypassing all safety features, including, but not limited to the brake monitor, and anti-repeat features, and the 01D press bypassing the top stop faults, exposing them to amputation hazards.