Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
Inspection Nr: 1747880.015
Citation: 01003C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/17/2024
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 10/16/2024
Gravity: 1
Report ID: 0830600
Contest Date:
Final Order: 10/08/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/08/2024 | $0.00 | 10/16/2024 | Serious | |
| Penalty | Z: Issued | 09/17/2024 | $0.00 | 10/16/2024 | Serious |
Text For Citation: 01 Item/Group: 003C Hazard:
29 CFR 1910.219(d)(1): Pulleys with parts seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a)On or about May 13, 2024, and at times prior, the employer did not ensure employees were protected from the in-running nip point hazard associated with the cover not adequately guarding the belt and pulley system powering the Delta drill press, Serial #9111. The separation between the upper pulley cover and the lower pulley cover assembly was approximately an inch and did not fully enclose the belt and pulley exposing employees to in-running nip points. The latch mechanism was damaged and did not effectively secure the pulley covers. This condition exposed the employees to abrasions, lacerations and fractures.