Translate
Violation Detail
Standard Cited: 19100036 G02 Design and construction requirements for exit routes.
Inspection Nr: 315082628
Citation: 01003B
Citation Type: Other
Abatement Status: X
Initial Penalty:
Current Penalty:
Issuance Date: 05/10/2011
Nr Instances: 2
Nr Exposed: 5
Abatement Date: 06/08/2012
Gravity: 05
Report ID: 0729700
Contest Date: 06/01/2011
Final Order: 07/23/2012
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/23/2012 | 06/08/2012 | Other | ||
| Penalty | Z: Issued | 05/10/2011 | 06/24/2011 | Serious |
Text For Citation: 01 Item/Group: 003B Hazard: CHEMNEP
29 CFR 1910.36(g)(2): Way(s) of emergency exit access were less than 28 inches in width: Employees working in the assigned areas below were exposed to hazards associated with not being able to evacuate safely during an emergency: a) Kill floor at the end of the gut table (east side) - The measured width from the end of the gut table to the chute was approximately 20 1/2". 29 CFR 1903.19(c)(2) abatement of the above violation was verified at the time of inspection. No certification is required. b) Quality Assurance (in connection to fab-floor) in K-Sealer room - The measured width from the wall to the moving conveyor was approximately 13". 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is completed.