Translate
Violation Detail
Standard Cited: 19100303 G02 I General.
Inspection Nr: 1586564.015
Citation: 01003B
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/23/2022
Nr Instances: 2
Nr Exposed: 5
Abatement Date: 07/17/2023
Gravity: 5
Report ID: 0522300
Contest Date: 10/11/2022
Final Order: 05/15/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | 06/29/2023 | $0.00 | 07/17/2023 | Other | |
| Penalty | F: Formal Settlement | 05/15/2023 | $0.00 | 07/17/2023 | Other | |
| Penalty | C: Contested | 10/11/2022 | $0.00 | 11/10/2022 | Serious | |
| Penalty | Z: Issued | 09/23/2022 | $0.00 | 11/10/2022 | Serious |
Text For Citation: 01 Item/Group: 003B Hazard:
29 CFR 1910.303(g)(2)(i): Except as�elsewhere required�or permitted�by this�standard, live�parts of�electric equipment�operating at�50 volts�or more�shall be�guarded against�accidental contact by�use of�approved cabinets�or other�forms of�approved enclosures: a) On or about March 30, 2022, the employer did not ensure that #K8 Roll Thread Machine (K27-8) (R-1) was guarded against accidental contact by use of an approved enclosure. Specifically, the 3-phase, 460-volt, 20.6-amp electrical control compartments, control wires passing through the knock outs on the exterior of the enclosure. b) On or about April 12, 2022, the employer did not ensure that #T 3 Roll Thread Machine (K27-7) was guarded against accidental contact by use of an approved enclosure. Specifically, the broken face plate on the 2x4 box, a 120-volt receptacle on the exterior of the machine, and the 1/2" EMT is separated from the box exposing conductors.