Translate
Violation Detail
Standard Cited: 19100213 G01 Woodworking machinery requirements.
Inspection Nr: 1582937.015
Citation: 01003A
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $10,151.00
Current Penalty: $10,151.00
Issuance Date: 08/17/2022
Nr Instances: 1
Nr Exposed: 4
Abatement Date:
Gravity: 10
Report ID: 0523400
Contest Date:
Final Order: 09/13/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/13/2022 | $10,151.00 | Serious | ||
| Penalty | Z: Issued | 08/17/2022 | $10,151.00 | Serious |
Text For Citation: 01 Item/Group: 003A Hazard:
29 CFR 1910.213(g)(1): Swing cutoff saw(s) were not provided with an automatically adjusting hood that completely enclosed the upper half of the saw, the arbor end, and the point of operation at all positions of the saw: Its hood was not designed in a manner that as to automatically cover the lower portion of the blade, so that when the saw was returned to the back of the table the hood will rise on top of the fence, and when the saw was moved forward the hood will drop on top of and remain in contact with the material being cut. (a) 14 inch CTD Cut-Off Saw - Located in the middle of production area: On or about March 11, 2022, the automatic adjusting hood guard located on each of the two independent operating heads of the saw did not operate in a manner that would fully cover the blade and protect employees working at and around the exposed saw blades from cuts, abrasions, and amputation hazard.