Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1344589.015
Citation: 01003A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $12,805.00
Current Penalty: $6,404.00
Issuance Date: 11/06/2018
Nr Instances: 3
Nr Exposed: 10
Abatement Date: 02/01/2019
Gravity: 10
Report ID: 0524700
Contest Date:
Final Order: 12/04/2018
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $6,404.00 | 02/01/2019 | Serious | ||
| Penalty | I: Informal Settlement | 12/04/2018 | $6,404.00 | 01/04/2019 | Serious | |
| Penalty | Z: Issued | 11/06/2018 | $12,805.00 | 11/16/2018 | Serious |
Text For Citation: 01 Item/Group: 003A Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. Alkon Corporation - Fremont, Ohio: On or about September 6, 2018, employees that operated the 1014 Davenport #8 were exposed to injury from pinch points and rotating parts created by the machine's moving parts such as, but not limited to, the cam and auger. The machine was not adequately guarded in that employees were not prevented from accessing the hazard areas during operation. b. Alkon Corporation - Fremont, Ohio: On or about September 6, 2018, employees that operated the 1016 Davenport #9 were exposed to injury from pinch points and rotating parts created by the machine's moving parts such as, but not limited to, the cam and auger. The machine was not adequately guarded in that employees were not prevented from accessing the hazard areas during operation and when utilizing the machines controls. c. Alkon Corporation - Fremont, Ohio: On or about September 6, 2018, employees that operated the 1018 Davenport #11 were exposed to injury from pinch points and rotating parts created by the machine's moving parts such as, but not limited to, the cam and auger. The machine was not adequately guarded in that employees were not prevented from accessing the hazard areas during operation.