Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 1064409.015
Citation: 01003A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $4,500.00
Current Penalty: $2,925.00
Issuance Date: 07/24/2015
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 09/10/2015
Gravity: 5
Report ID: 0729300
Contest Date:
Final Order: 08/21/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/21/2015 | $2,925.00 | 09/10/2015 | Serious | |
| Penalty | Z: Issued | 07/24/2015 | $4,500.00 | 09/10/2015 | Serious |
Text For Citation: 01 Item/Group: 003A Hazard:
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employee(s) in that employee(s) were exposed to the hazard of being struck-by: Inside of the Fabrication Department, employees were exposed to a struck-by hazard due to the lack of safe handling and installation of dies on the following equipment: a/ K.R. Wilson Hydraulic Press, m/n 3700V2-B, s/n 2051. One method of abatement to correct this apparent hazard is to identify and label the die with the tonnage, die size, upper die weight, total die weight, and maximum stroke requirements as required by ANSI B11.2-1995, paragraph 9.2.1. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method.