Translate
Violation Detail
Standard Cited: 19100217 B07 III Mechanical power presses.
Inspection Nr: 1029772.015
Citation: 01003A
Citation Type: Serious
Abatement Date: 05/18/2015 2
Initial Penalty: $7,000.00
Current Penalty: $6,000.00
Issuance Date: 04/23/2015
Nr Instances: 1
Nr Exposed: 20
Related Event Code (REC): A
Gravity: 10
Report ID: 0524700
Contest Date:
Final Order: 06/02/2015
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/02/2015 | $6,000.00 | 05/18/2015 | Serious | |
| Penalty | Z: Issued | 04/23/2015 | $7,000.00 | 05/18/2015 | Serious |
Text For Citation: 01 Item/Group: 003A Hazard:
29 CFR 1910.217(b)(7)(iii): Mechanical power press(es) using part revolution clutches were not provided with a means of selecting off, inch, single stroke, and continuous (when the continuous function was furnished) with the clutch/brake control to select: a.) Shiloh Industries, Inc. dba Wellington Stamping located at 350 Maple St. Wellington, OH 44090; The employer did not assure the fixing of selection for the Off , Inch , Single Stroke , and Continuous modes on the OBI Danly Mechanical Power Presses were only by means capable of supervision by the employer. Employees are required to change the modes of the presses for adjusting the top stop and to run production and are exposed to amputation hazards in that no key is required to change modes.