Text For Citation: 01 Item/Group: 003 Hazard:

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation and rotating parts: a) Inside building 2, the set screws for the steady rest of boring machine PB 2 Le Blonde (model number 4GSR, unknown serial number) were not guarded, exposing employees to caught-in hazards. b) Inside building 2, the set screws for the steady rest of drilling machine PD 7 Le Blonde (model number 4GSR, unknown serial number) were not guarded, exposing employees to caught-in hazards. c) Inside building 2, the ram and die for the Pacific 500 ton press (model number 500PFII, serial number 6686) were not guarded exposing employees to pinch points. d) Inside building 2, the ram and die for the Verson 1000 ton press (model number 1000-HDI-ST, serial number 9759) were not guarded exposing employees to pinch points. e) Inside building 2, the set screws for the steady rest of drilling machine PD 3 Unisig 10 (model number B700-BTA150, unknown serial number) were not guarded, exposing employees to caught-in hazards. f) Inside building 2, the set screws for the steady rest of drilling machine PD 11 Le Blonde (model number 4GSR, unknown serial number) were not guarded, exposing employees to caught-in hazards. g) Inside building 4, the chuck for PT 1 Hankook lathe (model Protec, unknown serial number) was not completely guarded exposing employees to caught-in hazards. h) Inside building 4, the chuck for PT-2 Toolmex lathe (model numberTUR 560, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. i) Inside building 4, the chuck for PT-2 Kuraki lathe (model number KH6-30, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. j) Inside building 4, the chuck for PT-3 Kuraki lathe (model number KH6-30, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. k) Inside building 4, the chuck for PT-4 Kuraki lathe (model number KH6-30, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. l) Inside building 4, the chuck for PT-5 Kuraki lathe (model number KH6-30, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. m) Inside building 4, the chuck for PT-6 Kuraki lathe (model number LC-403, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. n) Inside building 4, the chuck for PT-7 Kuraki lathe (model number LC-403, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. o) Inside building 4, the chuck for PT-8 Kuraki lathe (model number LC-15-30, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. p) Inside building 4, the chuck for PT-9 Willis lathe (model number 3500 PA 3514030, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. q) Inside building 4, the chuck for PT-10 Tuda lathe (model Oilstar 10120, unknown serial number) was not completely guarded, exposing employees to caught -in hazards. r) Inside building 4, the chuck for PT-11 Tuda lathe (model Oilstar 10120, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. s) Inside building 4, the chuck for PT-12 Lehmann lathe (model HydraTrol, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. t) Inside building 4, the chuck for PT-13 Kuraki lathe (model number LC-403, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. u) Inside building 4, the chuck for PT-14 Kingston lathe (model Heavy Duty 34, unknown serial number) was not completely guarded, exposing employees to caught-in hazards. v) Inside building 4, the chuck for PT-15 Kuraki lathe (model number LC-403, unknown serial number) was not completely guarded, exposing employees to caught-in hazards.