Violation Detail
Standard Cited: 95012901
Inspection Nr: 309047173
Citation: 01003
Citation Type: Serious
Abatement Status: X
Initial Penalty: $688.00
Current Penalty: $378.40
Issuance Date: 05/31/2005
Nr Instances: 3
Nr Exposed: 50
Abatement Date: 06/24/2005
Gravity:
Report ID: 0453730
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/09/2005 | $378.40 | 06/24/2005 | Serious | |
| Penalty | Z: Issued | 05/31/2005 | $688.00 | 06/24/2005 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard: UNAPOPPROC
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a)Vertical Lathe Area - - The rated load capacity was not displayed on the side of a jib crane structure. REFERENCEANSI/ASME B30.11-1998 - Monorails and Underhung Cranes, Chapter 11-1 - Construction and Installation, Section 11.1.1.1 - Rated Load Markings - Crane: The rated load of the crane shall be marked on the crane, and if the crane has more than one hoisting unit, each hoist shall have its rated load marked on the hoist or its load block so that the rated load marking shall be legible from the ground or floor. The combined load on all hoists on the crane shall not exceed the rated load of the crane. NOTE:Among other methods, one feasible and acceptable method to correct this hazard is to clearly mark or label the rated capacity of the jib structure on both side of the hoist support beam.
Translate