Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1781707.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $10,641.00
Current Penalty: $7,980.00
Issuance Date: 03/13/2025
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 12/18/2026
Gravity: 5
Report ID: 0523300
Contest Date:
Final Order: 04/08/2025
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/08/2025 | $7,980.00 | 12/18/2026 | Serious | |
| Penalty | Z: Issued | 03/13/2025 | $10,641.00 | 03/21/2025 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about October 15, 2024, the employer did not ensure that the machines were not equipped with one or more methods of machine guarding to prevent the operator from being exposed to amputation and/or caught-in hazards, from rotating parts, during normal operations, while operating the 208B Pointer Machine. (b) On or about October 15, 2024, the employer did not ensure that the machines were not equipped with one or more methods of machine guarding to prevent the operator from being exposed to amputation and/or caught-in hazards, from rotating parts, during normal operations, while operating the 203 WeldMill machine. (c) On or about October 15, 2024, the employer did not ensure that the machines were not equipped with one or more methods of machine guarding to prevent the operator from being exposed to amputation and/or caught-in hazards, from rotating parts, during normal operations, while operating the 208 WeldMill machine. (d) On or about October 15, 2024, the employer did not ensure that the machines were not equipped with one or more methods of machine guarding to prevent the operator from being exposed to amputation and/or caught-in hazards, from rotating parts, during normal operations, while operating the 2003 WeldMill machine. (e) On or about October 15, 2024, the employer did not ensure that the machines were not equipped with one or more methods of machine guarding to prevent the operator from being exposed to amputation and/or caught-in hazards, from rotating parts, during normal operations, while operating the 2006 WeldMill machine. (f) On or about October 15, 2024, the employer did not ensure that the machines were not equipped with one or more methods of machine guarding to prevent the operator from being exposed to amputation and/or caught-in hazards, from rotating parts, during normal operations, while operating the 2007 WeldMill machine. (g) On or about October 15, 2024, the employer did not ensure that the machines were not equipped with one or more methods of machine guarding to prevent the operator from being exposed to amputation and/or caught-in hazards, from rotating parts, during normal operations, while operating the 1676 WeldMill machine. (h) On or about October 15, 2024, the employer did not ensure that the machines were not equipped with one or more methods of machine guarding to prevent the operator from being exposed to amputation and/or caught-in hazards, from rotating parts, during normal operations, while operating the 1694 WeldMill machine.