Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1690974.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $15,625.00
Current Penalty: $9,804.00
Issuance Date: 12/26/2023
Nr Instances: 1
Nr Exposed: 4
Abatement Date: 02/29/2024
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 01/19/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/19/2024 | $9,804.00 | 02/29/2024 | Serious | |
| Penalty | Z: Issued | 12/26/2023 | $15,625.00 | 02/13/2024 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about August 15, 2023, employees changing dies or maintaining equipment including but not limited to the RATCHET machines (20D155, 2000, 20MFX1, 20MFX2, and 20MFX3), HARDINGE machines (22LBF1, 22LBF2, 22LBF3, 22LBF4, 22LBF5, 22LBF6, 22LBF7, 22NC701, 2200, and 22HARD), OMNIS lathes (13C1179, 13LTF1, 13LTF2, 13LHF5, 13LHF6, 12NC110, 12NC900, and 13NC906), and WADCO machines (25P3, 25p997, and 25R1299) in Mazaks (2000), CNC Lathes (2200), Lathe (1300), Omni (1300), Finishing (1700), and Assembly (2500) were exposed to the release of potential electrical (240volts-480volts), and pneumatic energy; the employer did not ensure each machine had clear and specific procedures to outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy.