Translate
Violation Detail
Standard Cited: 19100213 N01 Woodworking machinery requirements.
Inspection Nr: 1623708.015
Citation: 01003
Citation Type: Serious
Abatement Status: Not Completed - AD Discretion
Initial Penalty: $12,031.00
Current Penalty: $6,015.50
Issuance Date: 02/08/2023
Nr Instances: 2
Nr Exposed: 4
Abatement Date: 03/02/2023
Gravity: 10
Report ID: 0521100
Contest Date:
Final Order: 02/28/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/28/2023 | $6,015.50 | 03/02/2023 | Serious | |
| Penalty | Z: Issued | 02/08/2023 | $12,031.00 | 03/02/2023 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.213(n)(1): Each planing, molding, sticking, and matching machine shall have all cutting heads, and saws if used, covered by a metal guard. If such guard is constructed of sheet metal, the material used shall be not less than 1/16 inch in thickness, and if cast iron is used, it shall be not less than three-sixteenths inch in thickness: On or about September 21, 2022, at a workplace located at 1000 Morris Street, Fond du Lac, Wisconsin in the Moulding Department: The Weinig Hydromat 32 moulding machine did not have metal guards in place covering the cutter heads while in operation. The cutter heads were accessible from the front of the machine and/or the infeed opening.