Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1598987.015
Citation: 01003
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $14,502.00
Current Penalty: $14,502.00
Issuance Date: 09/29/2022
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 10/19/2022
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 10/26/2022
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/26/2022 | $14,502.00 | 10/19/2022 | Other | |
| Penalty | Z: Issued | 09/29/2022 | $14,502.00 | 10/19/2022 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: (2)Machine or equipment shutdown. The machine or equipment shall be turned off or shut down using the procedures established for the machine or equipment. An orderly shutdown must be utilized to avoid any additional or increased hazard(s) to employees as a result of the equipment stoppage. (3)Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s). (4)(I) Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees a) On or about 5/25/2022, the employer did not ensure maintenance employees did not ensure that maintenance employees affixed a lockout or tagout to an energy isolating device before attempting maintenance work on equipment such as but not limited Demag Hoist, DCS-Pro-10-1000 SN# 93990464.