Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1588408.015
Citation: 01003
Citation Type: Serious
Abatement Date: 08/10/2022 2
Initial Penalty: $10,151.00
Current Penalty: $5,075.50
Issuance Date: 07/22/2022
Nr Instances: 7
Nr Exposed: 4
Related Event Code (REC):
Gravity: 10
Report ID: 0626600
Contest Date:
Final Order: 08/19/2022
Emphasis:
| Failure to Abate | |||||||
|---|---|---|---|---|---|---|---|
| Activity Nr | Issuance | Penalty | Contest | Final Order | |||
| 1631578 | 04/06/2023 | $82,031.50 | 05/04/2023 | ||||
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| FTA | I: Informal Settlement | 05/04/2023 | $82,031.50 | 10/02/2023 | 1631578.015 | |
| FTA | P: Petition to Mod Abatement | 05/04/2023 | $82,031.50 | 10/02/2023 | 1631578.015 | |
| Penalty | P: Petition to Mod Abatement | 05/04/2023 | $5,075.50 | 08/10/2022 | Serious | |
| FTA | Z: Issued | 04/06/2023 | $164,063.00 | 04/25/2023 | 1631578.015 | |
| Penalty | I: Informal Settlement | 08/19/2022 | $5,075.50 | 08/10/2022 | Serious | |
| Penalty | Z: Issued | 07/22/2022 | $10,151.00 | 08/10/2022 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about April 20, 2016, and at times prior thereto: a. In the machining area, employees were using a TruBend brand 5230 press break, identified by the employer as PB1, without a guard to protect employees from the point of operation. b. In the machining area, employees were using a TruBend brand 5085 press break, identified by the employer as PB2, without a guard to protect employees from the point of operation. c. In the machining area, employees using a unknown brand roll bender, identified by the employer as LR1, without a guard to protect employees from the point of operation. d. In the machining area, employees using a Roundo brand pipe bender, identified by the employer as R1, without a guard to protect employees from the point of operation. e. In the machining area, employees using a Dayton brand drill press, identified by the employer as D1, without a guard to protect employees from the point of operation. f. In the machining area, employees using a Porter Cable brand drill press, identified by the employer as D2, without a guard to protect employees from the point of operation. g. In the machining area, employees using a Mek Verkstad brand drill press, identified by the employer as D3, without a guard to protect employees from the point of operation.