Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1566908.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $10,360.00
Current Penalty: $5,200.00
Issuance Date: 04/22/2022
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 09/01/2022
Gravity: 5
Report ID: 0521400
Contest Date:
Final Order: 05/09/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/09/2022 | $5,200.00 | 09/01/2022 | Serious | |
| Penalty | Z: Issued | 04/22/2022 | $10,360.00 | 05/20/2022 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.147(d): The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: On or about November 17, 2021 employee(s) performed set-up (servicing) on the Pleater machine were not required to take the following steps to control hazardous energy sources: 1) Know the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy; 2) Turn off and shut down the machine(s); 3) Physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the energy source; 4) Affix lockout or tagout devices to each energy isolating device; 5) Prior to starting work on machines that have been locked out or tagged out, verify that isolation and de-energization of the machine or equipment have been accomplished. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).