Translate
Violation Detail
Standard Cited: 19100147 C07 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1529339.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,557.00
Current Penalty: $0.00
Issuance Date: 08/17/2021
Nr Instances: 5
Nr Exposed: 21
Abatement Date: 12/15/2021
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 09/08/2021
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/08/2021 | $0.00 | 12/15/2021 | Serious | |
| Penalty | Z: Issued | 08/17/2021 | $9,557.00 | 10/04/2021 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following: (A)Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control. a) On or about May 6, 2021, the employed did not provide adequate training on the lockout program for authorized employees for the safe application, usage, and removal of lockout controls on machines in that employees had not been adequately trained on machines such as but not limited to the Lite Machine, the Diehl 55 Rip Saw, the Challoner 723 Tenoner Trim Saw, the Tyler Power Pod Cold Press #1, and the Panel Saw Across From West Entrance Door.