Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1497552.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $10,513.00
Current Penalty: $5,256.50
Issuance Date: 02/16/2021
Nr Instances: 5
Nr Exposed: 4
Abatement Date: 04/22/2021
Gravity: 10
Report ID: 0522500
Contest Date:
Final Order: 03/03/2021
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/03/2021 | $5,256.50 | 04/22/2021 | Serious | |
| Penalty | Z: Issued | 02/16/2021 | $10,513.00 | 03/22/2021 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. On or about January 14, 2021, an employee performed maintenance and servicing on a Wash tank to remove the old electrical and motor controllers. Machine-specific procedures were not developed, documented and utilized for the control of potentially hazardous energy associated with the Wash tanks. Hazardous energy sources included, but were not limited to, electrical energy. b. On or about January 14, 2021, and at times prior, employees performed maintenance and servicing on the Harrop Kiln. Machine-specific procedures were not developed, documented and utilized for the control of potentially hazardous energy associated with the Harrop Kiln. Hazardous energy sources included, but were not limited to, thermal energy and electrical energy. c. On or about December 1, 2020, and at times prior, employees performed maintenance and servicing on a diaphragm pump. Machine-specific procedures were not developed, documented and utilized for the control of potentially hazardous energy associated with the diaphragm pumps. Hazardous energy sources included, but were not limited to, electrical, hydraulic, and pneumatic. d. On or about October 7, 2020, and at times prior, an employee performed cleaning of the dies on the Stokes R4 Part-Revolution Mechanical Power Press (MPP). Machine-specific procedures were not developed, documented and utilized for the control of potentially hazardous energy associated with the Stokes MPP. Hazardous energy sources included, but were not limited to, electrical and gravitational. e. On or about October 1, 2020, and at times prior, an employee performed a tooling change on the Stokes R4 Part-Revolution Mechanical Power Press (MPP). Machine-specific procedures were not developed, documented and utilized for the control of potentially hazardous energy associated with the Stokes MPP. Hazardous energy sources included, but were not limited to, electrical and gravitational.