Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1439861.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $13,494.00
Current Penalty: $8,096.40
Issuance Date: 02/26/2020
Nr Instances: 5
Nr Exposed: 3
Abatement Date: 03/20/2020
Gravity: 10
Report ID: 0418800
Contest Date:
Final Order: 03/16/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/16/2020 | $8,096.40 | 03/20/2020 | Serious | |
| Penalty | Z: Issued | 02/26/2020 | $13,494.00 | 03/20/2020 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Employees were exposed to caught by hazards where the point of operation was not guarded on machinery including but not limited to: a. On or about 10/24/2019, at Interplex Sun Belt Inc., 6690 Hiatus Rd, Tamarac FL 33321. Tool room - Employees were exposed to a caught by hazard while working with a drill press (i.e. Clausing #3, Model 2286, Serial No. 522924) that lacked a guard on its point of operation. b. On or about 10/24/2019, at Interplex Sun Belt Inc., 6690 Hiatus Rd, Tamarac FL 33321. Tool room - Employees were exposed to a caught by hazard while working with a lathe (i.e. Victor 1630, Asset M0057) that lacked a guard on its point of operation. c. On or about 1/29/2020, at Interplex Sun Belt Inc., 6690 Hiatus Rd, Tamarac FL 33321. Molding department - Employees were exposed to a caught by hazard while working with a molding press (i.e. M-14, Nissei Model TH40-54SE) whose guard did not prevent employee from reaching into the point of operation. d. On or about 1/29/2020, at Interplex Sunbelt Inc., 6690 Hiatus Rd, Tamarac FL 33321. Molding department - Employees were exposed to a caught by hazard while working with a molding press (i.e. M-19, Nissei Model TH60-2VSE, Serial No. T06V022) whose guard did not prevent employee from reaching into the point of operation. e. On or about 1/29/2020, at Interplex Sun Belt Inc., 6690 Hiatus Rd, Tamarac FL 33321. Molding department - Employees were exposed to a caught by hazard while working with a molding press (i.e. M-5, Nissei Model TH60-2VSE, Serial No. T06U011) whose guard did not prevent employee from reaching into the point of operation.