Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1289213.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,239.00
Current Penalty: $4,619.00
Issuance Date: 03/22/2018
Nr Instances: 1
Nr Exposed: 20
Abatement Date: 04/04/2018
Gravity: 5
Report ID: 0524700
Contest Date:
Final Order: 04/10/2018
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/10/2018 | $4,619.00 | 04/04/2018 | Serious | |
| Penalty | Z: Issued | 03/22/2018 | $9,239.00 | 04/04/2018 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): Nanogate Jay Systems, LLC - Mansfield, Ohio: On or about December 28, 2017, employees were exposed to crushing and struck-by injuries in that the #27 Engel molding machine (s/n 208536) was not deenergized prior to servicing tasks such as, but not limited to, cleaning the machine. The employer did not ensure that energy control application steps were implemented to control hazardous electrical/hydraulic and pneumatic energy sources of the machine's platen and associated parts picker; prior to the servicing task - the employer did not: - Ensure employees had the method or means to control hazardous energy. - Physically operate energy isolating devices and affix lockout device(s) to control the energy source(s). - Verify that isolation and de-energization of the machine or equipment had been accomplished.