Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
This violation item has been deleted.
Inspection Nr: 1280204.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,239.00
Current Penalty: $0.00
Issuance Date: 05/10/2018
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 06/06/2018
Gravity: 5
Report ID: 0418100
Contest Date: 06/04/2018
Final Order: 04/01/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | D: Govt Dismissed | 04/01/2019 | $0.00 | 06/06/2018 | Serious | |
| Penalty | C: Contested | 06/07/2018 | $9,239.00 | 06/06/2018 | Serious | |
| Penalty | Z: Issued | 05/10/2018 | $9,239.00 | 06/06/2018 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about November 30, 2017, employees were exposed to caught-in hazards at the conveyor drive system labeled D40568 when performing the following work: a. employees climbed a ladder to clear jams on the overhead conveyor b. employees climbed a ladder or used a lift to get to the disconnect in order to lock out the conveyor for maintenance In the alternative: 29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about November 30, 2017, employees were exposed to caught-in hazards at the conveyor drive system labeled D40568 when performing the following work without locking out prior to climbing a ladder or using a lift to approach the conveyor drive system: a. employees climbed a ladder to clear jams on the overhead conveyor b. employees climbed a ladder or used a lift to get to the disconnect in order to lock out the conveyor for maintenance