Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1130304.015
Citation: 01003
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $7,000.00
Current Penalty: $4,900.00
Issuance Date: 03/29/2016
Nr Instances: 4
Nr Exposed: 10
Abatement Date:
Gravity: 10
Report ID: 0729300
Contest Date:
Final Order: 04/15/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/15/2016 | $4,900.00 | Serious | ||
| Penalty | Z: Issued | 03/29/2016 | $7,000.00 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a/ Inside of the Finishing Center, the Kirk-Rudy Feeder Unit, m/n 311, s/n 433615, was unguarded. An amputation occurred on or about 03/05/16. b/ Inside of the Main Building, the Hogger was unguarded. The moving component of this unit measured approximately 67.5"L X 74"H. Operator(s) were exposed to a serious pinch-point hazard. c/ Inside of the Maintenance Department, the rotating chuck belonging to the Yamazaki Lathe, unknown m/n or s/n, was unguarded. d/ Inside of the Maintenance Department, the rotating chuck belonging to the Sharp Lathe, m/n 1540, s/n W10386, was unguarded.