Translate
Violation Detail
Standard Cited: 19100036 G02 Design and construction requirements for exit routes.
Inspection Nr: 1100641.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $1,200.00
Current Penalty: $600.00
Issuance Date: 03/10/2016
Nr Instances: 2
Nr Exposed: 2
Abatement Date: 04/05/2016
Gravity: 1
Report ID: 0316400
Contest Date: 04/04/2016
Final Order: 07/18/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/18/2016 | $600.00 | 04/05/2016 | Serious | |
| Penalty | C: Contested | 04/07/2016 | $1,200.00 | 04/05/2016 | Serious | |
| Penalty | Z: Issued | 03/10/2016 | $1,200.00 | 04/05/2016 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points: (a) Edger Area: On or about October 21, 2015, and times prior, the distance between the conveyor and the edger where employees travel to and from the edger and exit the mill measured 17-19 inches in width. (b) Gang Saw: On or about October 21, 2015, and times prior, the distance between the gang saw and a wood rail where employees travel to gain access to and from the gang saw and to exit the mill measured 20 inches at widest point down to 7 inches at the narrowest point.