Translate
Violation Detail
Standard Cited: 19260404 B01 I Wiring design and protection.
Inspection Nr: 1072596.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $1,020.00
Current Penalty: $600.00
Issuance Date: 08/03/2015
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 08/11/2015
Gravity: 1
Report ID: 0936300
Contest Date:
Final Order: 09/01/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/01/2015 | $600.00 | 08/11/2015 | Serious | |
| Penalty | Z: Issued | 08/03/2015 | $1,020.00 | 08/11/2015 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1926.404(b)(1)(i): The employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites. These requirements are in addition to any other requirements for equipment grounding conductors: Near the east side exterior of the project, there were no ground-fault circuit-interrupters or an assured equipment grounding conductor program to protect employees that used a 110 VAC DeWalt miter saw to cut trim boards. Power was supplied to the saw through a flexible cord plugged into a 110 VAC wall outlet. The outlet was not a GFCI outlet. Employees were exposed to the hazard of contacting electricity.