Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1042919.015
Citation: 01003
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,300.00
Current Penalty: $4,900.00
Issuance Date: 06/25/2015
Nr Instances: 4
Nr Exposed: 2
Abatement Date: 07/30/2015
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 07/21/2015
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/21/2015 | $4,900.00 | 07/30/2015 | Serious | |
| Penalty | Z: Issued | 06/25/2015 | $6,300.00 | 07/30/2015 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s). a) On or about February 26, 2015, while operating the 65 ton Accupress Press Break, located in Fabrication Shop One at 873 Georgetown Rd., Salem, Ohio 44460, the employer did not ensure that employees were protected from putting their hands in the point of operation while bending metal plate stock. b) On or about the week of February 26, 2015, while operating the 400 ton Accupress Press Break(#1), located in Fabrication Shop One at 873 Georgetown Rd., Salem, Ohio 44460, the employer did not ensure that employees were protected from putting their hands in the point of operation while bending metal plate stock. c) On or about the week of February 26, 2015, while operating the 400 ton Accupress Press Break(#2), located in Fabrication Shop One at 873 Georgetown Rd., Salem, Ohio 44460, the employer did not ensure that employees were protected from putting their hands in the point of operation while bending metal plate stock. d) On or about the week of February 26, 2015, while operating the 300 ton Pacific Press Break, located in Fabrication Shop One at 873 Georgetown Rd., Salem, Ohio 44460, the employer did not ensure that employees were protected from putting their hands in the point of operation while bending metal plate stock.