Translate
Violation Detail
Standard Cited: 19260200 G02 Accident prevention signs and tags.
This violation item has been deleted.
Inspection Nr: 1011830.015
Citation: 01003
Citation Type: Serious
Abatement Status:
Initial Penalty: $7,000.00
Current Penalty: $0.00
Issuance Date: 06/03/2015
Nr Instances: 1
Nr Exposed: 11
Abatement Date: 06/09/2015
Gravity: 10
Report ID: 0317000
Contest Date: 06/22/2015
Final Order: 11/18/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | R: Review Commission | 11/18/2018 | $0.00 | 06/09/2015 | Serious | |
| Penalty | C: Contested | 07/17/2015 | $7,000.00 | 06/09/2015 | Serious | |
| Penalty | Z: Issued | 06/03/2015 | $7,000.00 | 06/09/2015 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1926.200(g)(2)/MUTCD 1988 Edition Section 6C-3: Traffic control signs or devices used for protection of construction workers did not conform to Part VI of the Manual of Uniform Traffic Control Devices (MUTCD"), 1988 Edition, Revision 3 in that the employer did not provide a roadway transition taper of the requisite length to ensure safe vehicle routing around the temporary work control zone. a) Jobsite: 422 W, mile marker 171.2 - On or about 12/3/2014, the employer did not establish a transition taper for the temporary traffic control zone to ensure safe vehicle routing and that was incompliance with Table VI-2 of the MUTCD, 1988 Edition, Revision 3. The employer's installed taper was approximately 120 feet in length which was much shorter than the approximately 300 feet required by Table VI-2.